Issue: Your Aikun Bluetooth device stops working on your Mac computer, even if it is listed as connected. Or it may not show up in the list of Bluetooth devices at all.

To resolve the problem, you may simply need to restart your Mac’s Bluetooth connection. It’s also possible that the Mac’s Preference List, which stores the Bluetooth devices and their current states, may be corrupted. In that case, you’ll need to remove your Mac’s Preference List and repair your device. If this doesn’t help, you may also need to reset your Mac’s Bluetooth settings. Try the following, testing after each to see if the problem has been resolved:

• 1- Restart the Mac Bluetooth connection
• 2- Remove the Mac’s Bluetooth Preference List
• 3- Reset the Mac’s Bluetooth settings

Restart the Mac Bluetooth Connection

• 1- Click Apple > System Preferences, and select the Bluetooth Preference Pane.
• 2- Click Turn Bluetooth Off.
• 3- Wait a few seconds, and then click Turn Bluetooth On.
• 4- Check to see if the Logitech Bluetooth device is working. If not, proceed to remove your Mac’s Bluetooth Preference List.

After you update from macOS 10.12 Sierra to macOS Sierra 10.12.1, Logitech Options software may not detect supported Unifying devices on some computers.

To fix this issue, unplug the Micro receiver and then plug it back into the USB port. If still doesn’t detect the device, you may also need to reboot your computer.

Yes, You can use Mission Bt33x With 2 devices at the same time, Use the Bluetooth 4.0v to contact with your Bluetooth device and Micro Receiver 2.4ghz plugin with another device, You’ll power through tasks by switching seamlessly between 2 computers

If your mouse stops working after your system has been inactive or wakes up from sleep, try modifying your Bluetooth adapter’s power settings.

• 1- Launch Control Panel > System and Security > System > Device Manager.
• 2- Under Bluetooth Radios, right-click your Bluetooth adapter (ex. Bt33x Wireless adapter) and click Properties.
• 3- In the Properties window, select the “Power Management” tab, and clear this check box: “Allow the computer to turn off this device to save power”.
• 4- Click OK and then reboot the PC.

If this solution doesn’t work, restart your computer and try again.

The Red battery and Bluetooth light on your mouse isn’t meant to stay on. This is the normal behavior of the mouse. When you turn your mouse on or replace the batteries, the light will come on for a few seconds. This indicates that the battery has enough charge for your mouse to work. The light will go off again after a few seconds to conserve battery power.

if your mouse double-clicked from the first day of usage, check the Windows setting called Single-click to open an item. This option makes a single mouse click act as a double click. Disable this setting to return the mouse to the standard one click option.

MOUSE ISN’T WORKING

If your mouse isn’t working, the problem is likely a lost connection. The connection between the mouse and the computer can be lost for several reasons, such as:

• Low battery power
• Using your mouse on metal surfaces
• Radio frequency (RF) interference from other wireless devices, such as:
  1. Wireless speakers
  2. Computer power supplies
  3. Monitors
  4. Cell phones
  5. Garage door openers

Try to rule out these and other possible problem sources that might be affecting your mouse.

MOUSE FREQUENTLY STOPS WORKING

If your mouse frequently stops working and you keep having to reconnect it, try these suggestions:

• Keep other electrical devices at least 8 inches (20 cm) away from the mouse and the host device.
• Move the mouse closer to the computer.

BEFORE RECONNECTING YOUR MOUSE

Before you try to connect your mouse again:

• Replace the batteries.
• Try moving the cursor to verify that it’s working.
• If it’s still not working, follow the appropriate link below to reconnect your mouse.

RECONNECTING YOUR MOUSE

NOTE: Start fresh by removing the existing pairing and then re-pairing.

Mission Bt33x Using 2 AAA Rechargeable Batteries, quickly and get enough power for a full day of usage, with no downtime while recharging. A full charge can last up to 70 days.

NOTE: Don’t use the normal Alkaline AAA Batteries with Battery with Bt33x, Must use AAA Rechargeable Batteries.